S.A.T. Changelog Coming Soon Fixed small bug when uploading custom TLE file. 1/15/2021 FW Ver. 5.226 Dash Ver. 3.268 Fixed the sound in the browser. Fixed the schedule using the AOS Alarm time. 1/5/2021 FW Ver. 5.225 Dash Ver. 3.267 Play the AOS Alarm in your Web Browser, the S.A.T or both. No mobile browsers. (Maybe?) The ground track was looking a bit rough, smoothed it out a bit. 1/5/2021 FW Ver. 5.223 Dash Ver. 3.261 Alarm has been changed to TIME instead of degrees. Scheduled satellites now honor the alarm time. You can now choose hours or orbits for ground track duration. 1/1/2021 FW Ver. 5.220 Dash Ver. 3.259 Click and drag on AZ chart to rotate orientation. Click and draw on Ground change to slide left and right. 12/22/2020 FW Ver. 5.220 Dash Ver. 3.254 Removed extra date in the footer of pass report. Fixed saving the rotator quality setting 12/22/2020 FW Ver. 5.218 Dash Ver. 3.254 Added documentation for new features to online user manual. 12/21/2020 FW Ver. 5.218 Dash Ver. 3.254 Added ability to manually point the rotator by grid square. Added feature to change VFO frequencies only when they change by a set amount instead of a set interval. Added support for Icom 820H/821H Added LCD brightness control if your hardware supports it. A more complete factory reset. 12/11/2020 FW Ver. 5.208 Dash Ver. 3.243 Add satellite tracking schedule with ability to save. Switch radio out of Sat mode automatically. Add a pass report. Download a report of future passes. Fixed a bug that incorrectly set the radio mode in very specific conditions. Fixed a bug where the minimum pass setting was not honored viewing future passes. 11/27/202/ FW Ver. 5.144 Dash Ver. 3.205 Bug - Fixed missing satellite name in new info page. 11/27/202/ FW Ver. 5.144 Dash Ver. 3.204 Added multiple window/monitor support. Added a satellite pass log. Shows a history of the last 20 passes that were tracked and rose above the horizon. Added link to QRZ.com in call log. Added ablity to delete QSO log entries. Added a highlight so you know when you've clicked a transponder. Added link the the user manual in the About box. 11/21/202/ FW Ver. 5.140 Dash Ver. 3.195 Adding metric or imperial option for LCD display. Fixed a bug for pound signs (#) in WiFi passwords. 11/20/202/ FW Ver. 5.130 Dash Ver. 3.190 Fixed a bug tracking satellites that never AOS in your area. 11/20/202/ FW Ver. 5.129 Dash Ver. 3.190 Added option to prevent antenna flipping. Added an Enable button to temporarily pause the rotator. Added a link to SatNOGS map page. Network list autmatically refreshed visible networks when opened. WiFi password is now visible when you enter it. Continuous mode must be selected with each new satellite. Improvements to Wifi connections. improvements to G5500 > 360 degrees. Improved web page traffic. Fixed a bug when no rotator is connected but is active in settings. 11/16/2020 FW Ver. 5.119 Dash Ver. 3.184 Bug fixes. 11/15/2020 FW Ver. 5.116 Dash Ver. 3.178 New widescreen display. If you want the old page add "/old" to the address in your browser. Adding logging with ADIF export. Added Moon tracking. Search for "Moon" Reset RIT to zero when selecting a transponder. Map is clickable in wide dashboard to switch to the line map. Rotator volts are now also displayed on the Dashboard, in the Rotator setup panel. Show all 3 digits of the firmware version on the LCD, instead of just 2. Cleared up instruction when VOLTS is clicked. Display MAC address on Network Panel Removed 'Ports' from network page. Not needed. Fixed a bug when searching for satellite that has spaces in the name. Fixed a stray clock showing in the map when no track time was set. If searching by catalog number, the sat name will be displayed if it's found. Knows issues: ADIF satellite name come from the TLE file and may match with accepted LoTW satellite names. Example - ISS in TLE but is ARISS for LoTW. Moon Lat and Lon is not yet computed. The device sometime needs to be powered off and on after a firmware update. 11/2/2020 FW Ver. 5.088 Dash Ver. 3.151 Fixed issue with Park and Ready Fixed issue connecting to access points with spaces in the name Add trial widescreen Dashboard. Add /wide to dashboard address. 10/27/2020 FW Ver. 5.084 Dash Ver. 3.144 Now sets the DATA mode for transponders in AFSK, SSTV, etc. Further improvements to radio communications. Fixed support for the G5400 and G5600 rotators. Added CLOSE buttons to all setting panels. Added a link to the changelog in the about box. Added version numbers to the change log. ;) 10/19/2020 FW Ver. 5.056 Dash Ver. 3.138 Fixed an extra character showing up on the LCD when tracking. Improved responsiveness when the S.A.T. cannot properly communicate with the radio. Fixed a bug where Android devices did not properly send the correct time.